WORKSHOP #5 - High Poly Hard Surface Practice

24 replies [Last post]
metalliandy's picture
Posts: 3188

Workshop #5 is now under way!

The challenge this time is to recreate the High Poly shapes shown in the images below.

Some of the shapes are pretty basic, but cutting holes into angled surfaces might provide a decent challenge for some people and a great way for everyone else to keep their chops up Smiling

 

Rules:

  • Model the shapes in the images below while matching them as closely as possible
  • Post your results below.

 

Good luck!

JBaldwin's picture
Posts: 2162

Sweet workshop :) 

Thanks!

-Jeremy-

ynos's picture
Posts: 1

I did one of them ^^

 

PD: I,m "Alberto3D" ,if the moderator see this , you can delete my post xD.

metalliandy's picture
Posts: 3188

Looks good, ynos Laughing out loud

My only real critique is that you could harden the hole in the cube by adding a loop. Smiling

Nice work!

 

Jcalby's picture
Posts: 15

Here are my renders for this workshop.  Is it to late to do the other workshops

eat3d_wshop5_shape01a_calby.jpg eat3d_wshop5_shape01b_calby.jpg eat3d_wshop5_shape01w_calby.jpg eat3d_wshop5_shape02a_calby.jpg eat3d_wshop5_shape02b_calby.jpg eat3d_wshop5_shape02w_calby.jpg
Jcalby's picture
Posts: 15

Here are the next 3.

 

eat3d_wshop5_shape03a_calby.jpg eat3d_wshop5_shape03b_calby.jpg eat3d_wshop5_shape03w_calby.jpg eat3d_wshop5_shape04a_calby.jpg eat3d_wshop5_shape04w_calby.jpg eat3d_wshop5_shape05a_calby.jpg eat3d_wshop5_shape05b_calby.jpg eat3d_wshop5_shape05w_calby.jpg
shibatazo's picture
Posts: 1

Hi

Can I use nurbs?

ershov's picture
Posts: 29

hi) 

fulljpg's picture
Posts: 6

Hello

cylindre01-workshop5.png cylindreedgedfaces-workshop5.png forme02-workshop5.png forme02edgedfaces-workshop5.png
fulljpg's picture
Posts: 6

Next one

forme03-workshop5.png forme03edgedfaces-workshop5.png
fulljpg's picture
Posts: 6

Next

forme04-workshop5.png forme04edgedfaces-workshop5.png
JBaldwin's picture
Posts: 2162

Great Job Guys! You are all nailing a lot of these shapes spot on Smiling

-Jeremy-

fulljpg's picture
Posts: 6

Thanks Jeremy

makan_ansari's picture
Posts: 112

Nice models

metalliandy's picture
Posts: 3188

Nice work everyone! Keep it up Laughing out loud

SsSandu_C's picture
Posts: 9

Hey guys! Here is my contribution. Smiling Let me know what you think.

eat3dw5.jpg
metalliandy's picture
Posts: 3188

Looking good,  SsSandu_C! Laughing out loud

Vilius's picture
Posts: 1

hello, better later than never;-)

ss_01.jpg ss_02.jpg
fulljpg's picture
Posts: 6

Great  job everyone !!!

 

metalliandy's picture
Posts: 3188

Nice work, guys!

Anonymous's picture

When will be next mini-chelenge ?

Anonymous's picture

Great workshop Andy! a suggestion tho, for those of us not as skilled as the rest it would be great to see maybe a tutorial at the end of the workshop as to how you made these shapes if they are your models? that way myself or anyone could be like "ahhh so thats one way to approach that, o that's how you get your cylinder to not distort when you subdivide it.

metalliandy's picture
Posts: 3188

@Anon, The workshop is ongoing and has no end date, but I will try and post some wires soon. Smiling

darn42's picture
Posts: 15

Here are the ones I could do.

I'm not sure how I can approach the other 2. Can anyone give me some hints or something like that? 

nnq2603's picture
Posts: 1

My pick in the inter-connected one. Other one's more popular than.